Miniature CO2 Adsorbers - MCA-SERIES

Twin Tower Engineering's Carbon Dioxide Adsorber-Dryers (MCA Series) are designed to remove CO2 and moisture from compressed air. This dryer uses dual towers with media beds featuring 13X molecular sieve in a pressure swing adsorption process. Adsorbed moisture and CO2 are vented to atmosphere while dry CO2-free air is provided at the outlet port.
The dual tower adsorber/dryer design performs two essential functions in one process eliminating the need for an additional unit, reducing costs. The regenerative design provide continuous clean dry, CO2 free air.
 
MCA-SERIES SPECIFICATIONS
Model No. MCA1 MCA2 MCA3 MCA4 MCA5 MCA6
Flows at 6,9 Bar (Lit/Min)
Inlet Flow 2,8 8,8 13,2 17,7 25,1 35,3
Purge Flow 1,2 3,7 5,5 7,8 10,3 14,8
Outlet Flow 1,6 5,1 7,7 9,9 14,8 20,5
Dimensions (cm)
Height 18 26 22 26 24 29
Width 9 9 10 10 13 13
Length 8 8 9 9 10 10
 
Connections (NPT)
Inlet Port 1/8" 1/8" 1/8" 1/8" 1/4" 1/4"
Outlet Port 1/8" 1/8" 1/8" 1/8" 1/4" 1/4"
Weight (gr) 624 680 709 851 992 1418
ALL MODELS
Outlet CO2 Concentration <1 ppm
Outlet Dew Point -73°C atmospheric dew point
Voltages Available 115/1/50/60, 220/1/50/60, 12 or 24 volt DC
Maximum Temperature 49°C ambient
Maximum Pressure 8,3 Bar
Capacities are based on inlet conditions of 21°C, 100%RH,
and normal ambient CO2 levels of approximate 375 ppm.
RECOMMENDED FILTRATION
Inlet 5.0 micron particle filter and 0.01 micron coalescing filter w/auto drain
Outlet 1 micron particle filter
FEATURES
  • Reduces CO2 to less than 1ppm
  • Reduces water vapor to less than 1ppm
  • Compact, lightweight design saves space
  • Easy to install
  • Continuous self-regenerative operation
  • Quiet
  • Operating pressure 3,4 to 8,3 Bar
  • Outlet pressure 0 to 8,3 Bar
  • 115 Volts AC, 6 watts, other voltages available

TYPICAL APPLICATIONS
  • TOC Analyzers
  • Continuous Emissions Monitoring Systems
  • Environmental Instruments
  • FTIR Spectrometers
  • Gas Chromatographs
  • Laboratory Analyzers

DOWNLOADS
© 2022 Rainer Lammertz